Multichannel Gas Regulator
Multichannel gas regulator МРРГ01 is developed for control of process gas delivery in laser stations. Regulators РРГ12 are used for consumption regulation; valves of Camozzi Corporation at pressure of up to 12 atm. are used for channel activation. The device controls input pressure in the lines and gas flow in each of 4 channels and due to merging of output channels it allows to create controlled percentage gas mixtures. General control is realized by microprocessor controller MGC02. The technique of pulse opening of valve allows for higher operating pressure in the lines, up to 20 atm.
Technical characteristics:
| Device type | МРРГ01 | Note |
|---|---|---|
| Supply voltage | 24 V | Maximum peak consumption current 2.6 A |
| Gas channel quantity | 4 | |
| Consumption per channel | 0.1800 l/h | Depending on brand of regulator РРГ12 |
| Permissible gases | Argon, helium, СО2, nitrogen, oxygen | |
| Connections |
Input — tube 8/6 mm Output — tube 6/4 mm |
|
| Interfaces | CAN | RS232 or RS485 converter is delivered, if needed |
| Robotized control | 4 activation lines and 4 consumption setting lines | All logic and analogue signals are electrically isolated |
| Local control (optional) | From control panel on device | Any control level: buttons, potentiometers, display, sensor display |
| Maximum input pressure | 20 atm. | By means of intellectual valve opening and closing equipment |
Version:
-
Single-board microcontroller MGC02 to be embedded. -
Ready-to-operate regulator МРРГ01. - Any custom modifications.
Process recommendations:
- Laser welding with weld seam protection and plasma pressure control. Use of gas mixtures for control of properties.
- Laser cutting with improved properties due to use of cutting gas mixtures.
- Ready solution for laser technology with application of industrial robots.